smbclient error

HTB Content Machines
1

I’m new here and I’m struck near “smbclient” its showing “do_connect: Connection to 10.10.10.27 failed (Error NT_STATUS_IO_TIMEOUT)” error. Can anyone plz help me!

2

What’s 10.10.10.27 ? This IP does not even reply to ICMP. Are you sure it’s the correct IP? What machine are you working on?

3

its from the tutorial nstructions i’ve followed after creating the A/C. It will be there in Starting Point

4

Well, the host seems to be down right know. Maybe it’s just temporary or maybe we should as HTB staff.

5

If it is starting point, it is only available to people on the starting point VPN.

@SRIKARNRK can you ping the box? Does NMAP show open ports?

6

Type your comment> @TazWake said:

If it is starting point, it is only available to people on the starting point VPN.

@SRIKARNRK can you ping the box? Does NMAP show open ports?

If I ping its sending and receiving data but showing UNAVAILABLE. And Nmap nope its not showing any open port for me.

Its showing like this if I do Nmap :-

Starting Nmap 7.80 ( https://nmap.org ) at 2020-08-27 11:36 EDT
Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn
Nmap done: 1 IP address (0 hosts up) scanned in 4.33 seconds

and If I ping the result will be

PING 10.10.10.27 (10.10.10.27) 56(84) bytes of data.
From 10.10.14.1 icmp_seq=1 Destination Host Unreachable
From 10.10.14.1 icmp_seq=2 Destination Host Unreachable
From 10.10.14.1 icmp_seq=3 Destination Host Unreachable

7

@Nism0 said:
Well, the host seems to be down right know. Maybe it’s just temporary or maybe we should as HTB staff.

Okay

8

@SRIKARNRK said:
PING 10.10.10.27 (10.10.10.27) 56(84) bytes of data.
From 10.10.14.1 icmp_seq=1 Destination Host Unreachable
From 10.10.14.1 icmp_seq=2 Destination Host Unreachable
From 10.10.14.1 icmp_seq=3 Destination Host Unreachable

So SMBClient isn’t your issue. The device isn’t reachable.

Check your VPN connection.

9

o enable the SMB1 share protocol, perform the following steps :
Click and open the Search Bar in Windows 10.
Scroll down to SMB 1.0/CIFS File Sharing Support.
Check the box net to SMB 1.0/CIFS File Sharing Support and all other child boxes will auto populate.
Click Restart Now to reboot the computer.

Regards,
Rachel Gomez